Sonos Play:5 gen1 Repair

The Sonos Play:5 gen1 was one of the best-selling Sonos speakers and was launched in 2009. The speaker has two tweeters, two midrange drivers and a bass driver.

Most of the problems occur in the passive input stage or the control of the switching power supply. The Play:5 gen1 is very sensitive to mains voltage spikes, such as those that occur when the neutral conductor is interrupted or a lightning strike occurs. Occasionally, Alpha's WiFi cards also cause problems. This is usually manifested in the behavior that the Play:5 can't perform a reset and flashes white/orange for more than 1 minute (usually it takes 20 to 30 seconds). Another known problem is that the music only plays very quite even when the volume is at 100%. However, the headphone output still works without any problems.

If a connection to the Play:5 cannot be established, it is recommended to connect the device directly to the router via an Ethernet cable. A power reset should be done again by pressing the play/pause button while the cable is plugged in. The play/pause button can be released once the LED flashes white/orange. After 20 to 30 seconds, it should now should flash green. If it does not, there is a hardware defect.

 

The Sonos Play:5 gen1 is very often repaired in our workshop. We also check all functions and replace parts to prevent future failures.

Play5gen1transparent.png

129€

Typical Sonos Play:5 gen1 errors:

  • Sonos Play:5 has no function

  • Sonos Play:5 no function after loss of zero/neutral wire

  • Sonos Play:5 LED flashes white only every second

  • Sonos Play:5 sound very low volume, but works through headphones

  • Sonos Play:5 reset is not possible

  • Sonos Play:5 LED flashes orange/white only

  • Sonos Play:5 sounds bad

  • Sonos Play:5 doesn't work anymore after a short circuit

  • Sonos Play:5 doesn't work anymore after a power surge

Do you want to have the device repaired by us? Just fill out the repair form and you will receive an email with the next steps within a short time.

Want to repair your Sonos device yourself? Then check out our online store.

Our Sonos repair service includes:

  • Organization of transportation. Optional collection directly from your home.

  • Analysis of the error

  • Repair of the error

  • Replacement of the defective part

  • Additional replacement of parts that typically prevent further failure in the future.

  • Full function check

  • Continuous test of 24 hours

  • Hygienic cleaning

  • Replacement of packaging material if required

Logo isonatec RGB oClaim.png

Sonos. Gerepareerd.